|
Eliminator SR
|
|
designed and produced by JOHN
STEVENS
|
|
 |
|
|
| "Sport/fun flyers will enjoy
its speed and good manners." |
| The choice of many of the UK's top slope race pilots with
a long history of success in 60" pylon racing. This kit features a high
degree of pre-fabrication with step by step instructions and diagrams
it requires the minimum amount of work to complete. |
| Wing Span |
60 inches |
| Wing Area |
432 sq inches |
| Loading |
12.7 oz per sq ft |
| A.U.W. |
2lb 6oz |
| Section |
RG15 |
| Controls |
Aileron, Elevator |
|
| "Probably the strongest
fuselage around!" |
| The beautifully styled fuselage is a top quality moulding
of epoxy/glass with kevlar and carbon reinforcement, finished in brilliant
white gelcoat. It features a close fitting nose cone with integral moulded
servo tray |
| The wing panels, have blue foam cores with epoxy/glass/veneer
skins which, provide a high degree of torsional stiffness and tough CARBON-fibre
leading edge. The panels are sanded to a fine finish with no further shaping
required, including the leading and trailing edges. Aileron positions
are clearly marked and channels for the servo wires are pre-cut ply. Strips
for facing ailerons are provided as are laminated balsa/ply tip blocks
cut to the correct outline ready for shaping. |
 |
The tails are balsa sheet cut to outline ready
for shaping. A choice of cruciform
or vee tail can be supplied. |
|
| |
