|
|
| Machining Solutions Brass coupling |
| Machining Solutions 2 |
 |
Brass Coupling | |
|
Problem: | |
|
Drill & tap #2 holes 1/8” NPT @ `A' | |
|
Drill Ø2mm @ `B', `C' & `D' | |
|
Previous cycle time, 2.33 minutes each across 3 fixtures and 4 drilling machines | |
|
Total per 7 hour effective shift = 180 articles | |
|
 Component |
|
|
Solution: | |
|
HAAS VF0E with an HRT210 rotary table | |
|
#1 dedicated 90 degree angle tombstone | |
|
#1 Brew-Eng ARTB 210 braked `A' frame | |
|
Quantity per cycle: 22 articles @ 11 per face. | |
|
Cycle time: 15.8 minutes, load/unload time 3.5 minutes. 19.3 minutes/22 articles = 0.87 minutes each. | |
|
Total per 7 hour effective shift = 478 articles. | |
|
 |
|
|
HAAS Machining Pocket view | |
|
 |
|
|
Side elevation with clamps removed. | |
|
The cycle time for the HAAS machining is on standard tooling, after installation carbide tooling was purchased and is now in use reducing the cycle time dramatically. | |
|
© Brew-Eng last modified 16/02/2000 |
|
Next Page Previous Page Home Back to Top | |
